Pipeline rollers can support, guide, and protect a section of the pipeline during crossings by rivers and roads. Pipe guide rollers reduce drag forces when a pipe is pulled through horizontally bored or drilled holes.
Pipe Standmakes conical or conveyor roller-style pipe rollers. They are suitable for applications that range from 2” HDPE pipe up to 48” heavy walled pipe with capacities of 1,000 to 80,000 lbs.
Pipeline rollers can be used to cross pipelines or protect the pipe’s exterior for pipes up to 48 inches in diameter. Pipe guide rollers reduce drag forces when the pipe is pulled through horizontally bored or drilled holes. Pipeline cradles can be used for small diameter pipes up to 12 inches.
Pipeline rollers can also be referred to by:
- Pipe Guide Rollers
- Pipeline Crossing Rollers
- Horizontal Rollers
- Pipe pulling rollers
- Pipe Drag Section Rollers
Pipe Roller Systems: What Are the Different Types?
Installers can use pipe roller systems to repair or build any size pipe. Single or double-sided steel pipe support systems are available in single and double designs. They are designed to support large pipes and support pipe systems once they have been installed. Pipe rollers are used to roll heavy pipes in place, ensuring maximum accessibility and efficiency.
- Standard pipe roller systems
Standard pipe rollers are available for condensate, gas, and electrical conduit. When pipe suspension or height adjustment is required, Hanging Pipe Supports can be used.
- Trenchless pipe rolling systems and roller systems
For use in harsh environments, trenchless pipe roller systems, and systems and roller systems and systems are made from hardened Polyurethane. These low-profile, adjustable roller systems are cost-effective and easy to use for handling pipes. These pipe rollers have a Polyurethane hardness range of 50A to 75D. Pipe supports and cradles are available in stackable, tunneling, and V-roller styles.
- Stackable pipe roller systems
Stackable Pipe Roller Systems are simple to transport and have a stackable design that reduces transportation costs. You can choose from lightweight bases or heavier base frames for easy handling and positioning to protect larger pipes from being moved during handling.
- Pipe roller slings
Rollie cradles, also known as pipe roller slings, are indispensable accessories for steel, coated, and plastic pipe handling applications. They are commonly used for pipeline staging, rigging, and other purposes. Pipe slings are used to lay welded pipe in a trench, lift pipe over rough surfaces during drag and drive a bend during launch. As the pipe is applied, a pipe rolling spreader bar supports it.
Internal Pipe Rolling Clamp
The Steel Ball Pipe Roller System or Internal Pipe Rolling Clamp is suited for uncoated steel pipe, while Nylon balls are fit to pipes with coatings or HDPE/PE pipes. With the supplied fasteners, their unique base frame design allows the frame to be clad to the top member of structural steel sections.
All Lifting Offers a Variety of Pipe Roller Systems to Meet Your Needs.
1-TON PIPELINE ROLLERS
Pipeline rollers support and guide pipeline sections during road and river crossings. Our pipe rollers reduce drag forces when pipe-pulling is done through horizontally bored or drilled holes.
The HZ6-300 pipe roller ensures smooth, safe rolling. It keeps pipes high above the ground and away from contaminants that could damage them. The HZ6-300 simplifies the handling and rolling and reduces operator strain. This makes it possible to run job sites more efficiently, increasing productivity and, ultimately, profitability. Allows for easier movement around and less equipment on job sites.
The modular design of HZ6-300 makes it possible to perform curved pulls. Furthermore, its lightweight means that the pipeline roller can be lifted easily with chains, straps or forks. Our pipe roller HZ6-300 protects the pipe’s exterior and reduces drag when the pipe is pulled through horizontal drilling holes.
Our pipeline rollers, HZ6-300, guide the tubes and center the piping as it moves along feeder cradles. The rolling surface comprises two conical-shaped urethane rollers and creates an ideal environment for pipes to roll easily. Pipe Stand’s pipeline rolling machines are used to support pipes that transport petroleum products, crude oil, natural gas, and other commodities worldwide.
The HZ6-300 pipe roller has a load of 1 Ton and a diameter that ranges from 2″ to 24″. We also have handles that make it easy to lift and move on-site.
5-TON PIPE ROLLER SUPPORTS
The HZM5-200 pipe roller has a modular design that can execute curved pulls. It is lightweight, so it can easily be lifted using chains, straps, or forks. Pipe Stand’s HZM5-200 assures safe and smooth rolling, and it keeps pipes off the ground from dirt and other debris. It is also designed to minimize drag and protect the pipe’s exterior as it is pulled through horizontal drilling holes.
Our pipeline roller HZM5-200 makes handling and rolling pipes faster and less time-consuming. This makes it possible to run a job site more efficiently, increasing productivity and ultimately profitability. It is easier to move around on job sites because there is less equipment.
Pipe Stand’s HZM5-200 pipe rollers guide the tubes and center the piping as it moves along feeder cradles. The rolling surface is made up of two v-rollers and oversized roller bearings. Pipe Stand’s pipeline rolling surfaces are used to support pipes that transport petroleum products, crude oil, and natural gas worldwide. The HZ6-300 pipe roller has a load capability of 5 tons and a diameter range from 4″ to 48″. We also offer an additional feature which includes lift hooks and forklift pockets for better movement on job sites.
10-TON PIPE ROLLER SUPPORTS
Pipe Stand’s HZM10-200-200 pipeline roller is designed to protect the pipe’s exterior and minimize drag when the pipe is pulled through horizontal drilling holes. It can perform curved pulls thanks to its lightweight. Our HZM10-20 allows safer and smoother rolling, keeping pipes above ground and away from any contamination.
The HZM10-20 makes handling and roll easier, more efficient, and less stressful for operators. This makes it possible to run job sites more efficiently, increasing productivity and profitability. It also reduces the amount of equipment required on job sites, which allows for more effortless movement for operators.
Pipe Stand’s HZM10-20 aligns the piping as it moves around the feeder cradle. Its rolling surface is made up of four molded urethane side rolls. Creates an oversized roller bearing and creates the dual v-roller design. Pipe Stand’s pipe rolling machines are used to support pipes that transport petroleum products, crude oil, and natural gas worldwide. The HZM10-20 pipe roller has a 10-ton load capacity and a diameter of 4″ to 48 inches. We also offer additional features such as forklift pockets or lift hooks that allow simple lifting and moving around the site.
40-TON PIPE ROLLER SUPPORTS
Pipe Stand’s pipe roller HMZ405100 protects the pipe exterior (coatings/yellow vest) during cross-country installations (i.e., Pipe Stand’s pipe roller HMZ405-100 reduces drag/pulling force by reducing the friction between road, river, and crossings. HMZ405100 reduces drag when the pipe is pulled through horizontal drilling holes.
It can also perform curved pulls. The lightweight of our design means that it is easy to lift with chains, straps, or forks. Using the HMZ405100 makes rolling smoother and safer. This keeps pipes above ground, keeping them free from contamination.
The HMZ405100 simplifies handling and rolls, reduces operator strain, and saves time. This makes it possible to run a job site more efficiently, increasing productivity and profitability. It also reduces the amount of equipment required on job sites, which allows for more effortless movement for operators.
HMZ405100 guides and centers the tubes as they move along the feeder cradle. The rolling surface is made up of 8 rollers and oversized roller bearings. Pipe Stand’s pipe rolling machines are used to support pipes that transport petroleum products, crude oil, and natural gas worldwide.
Pipe Stand’s HMZ405100 pipe roller has a 40-ton load capacity and a diameter of 4″ to 72″. We also offer an additional feature, including adjustable rollers and forklift pockets for quick-moving on-site.
Find a Product Product Search
Pipe Stands Our Products
Cobot Systems1 Product
Tripod Pipe Stands5 Products
Pipe Stands11 Products
Pipeline Rollers17 Products
Cable Reel Rollers3 Products
Pipe Lifting Jacks3 Products
Turning Rolls24 Products
Welding Manipulators9 Products
Welding Pipe Stands11 Products
Welding Positioners10 Products
Welding Turntables9 Products